Products

Mixers

Mixers for plastics

Mixing silos are of great importance for the reliable quality of plastics. They are often used for mixing and homogenizing different big-bags in order to prevent fluctuations in the downstream process.

The Master Batch Mixer (MBM) from KREYENBORG is specially designed for sensitive bulk materials and is ideally suited for the gentle and fast mixing of masterbatches and compounds, for example. Together with the Universal Quick Mixer (USM), which is suitable for a wider range of bulk materials such as powder and regrind, KREYENBORG offers ideal mixing solutions for the plastics industry.

Mixer type MBM for sensitive bulk materials

The stable and easy-to-use mixer type MBM has been specially designed for sensitive bulk materials and is used where products need to be handled gently and quickly mixed. It makes optimal homogenization of products.

The MBM allows quick and easy cleaning. The MBM can be optionally supplied with a controller, additional conveyors, screw conveyors and other options.

Application gentle and fast mixing of bulk materials
Products pellets, masterbatch, compounds, agglomerates, powder, etc
Construction consisting of a cylindrical container with cone and a large mixing screw arranged in the center
Function continuous and gentle mixing by a mixing screw, thus optimal homogenization of products
Economical low energy consumption (energy savings of up to 50% possible) due to short mixing time
Cleaning freely accessible areas through a manhole in cylinder and cone - No dead areas - Fast and effective cleaning - Short set-up times for other products
Maintenance low-maintenance bearings and direct drives
Start start-up of the mixer when filled by powerful direct drive, interval-free start-up possible
Smoothness quiet, almost noiseless running
Dust formation no dust formation around mixer during mixing operation
Volume volumes from 0.5 m³ to 20 m³
Quality solid “Made in Germany” constructed mixer

Mixer type USM for free-flowing bulk materials

The stable and easy-to-use Universal Quick Mixer type USM is used wherever free-flowing bulk materials need to be mixed precisely, quickly and cost-effectively. It ensures optimal homogenization of products.

The USM can be optionally supplied with a controller, additional conveyors, screw conveyors and other options.

Application precise mixing of bulk materials
Products pellets, masterbatch, compounds, agglomerates, powder, flakes
Construction cylindrical container with a cone and a centrically arranged mixing screw with mixing tube
Function the product is picked up by the mixing screw and transported upwards through the mixing tube. At the upper end of the screw, an ejector captures the mix and distributes it in fine layers over the entire container cross-section.
Economical low energy consumption (energy savings of up to 50% possible) due to short mixing time
Feeding the mixer can be fed either through a filling device at the top or by the optional lower feed hopper
Maintenance low-maintenance bearings and direct drives
Start powerful direct drives for starting the mixer even when full - intermittent start-up possible
Smoothness quiet, almost noiseless running
Dust formation no dust formation around mixer during mixing operation
Volume volumes from 1 m³ to 40 m³
Quality solid “Made in Germany” constructed mixer