Screen Changer K-SWE / LK-SWE
Page 1 of 2
 

Screen Changers for continuous operation
  The operating mode of the screen changers K-SWE/LK-SWE for continuous operation (without an interruption of the melt flow) is based on the well-proven principle of two screen bearing pistons.

During production, the plastic melt is divided into two flow channels inside the screen changer housing, then conveyed through the two filters equipped with the appropriate filter medium. This filter medium consists of screen packs in conjunction with the breaker plates.

Applications for the Screen Changer K-SWE

  • for processes with most different throughput capacities (laboratory applications up to large polymerisation lines)
  • for compounding, semi-finished production, recycling, manufacturing of fibres, polymerisation, film extrusion

Materials

  • suitable for almost all polymers
  • special design for PMMA and PC

Applications for the Screen Changer LK-SWE

  • for manufacturing processes with higher output rates and greater contamination
  • for semi-finished production, recycling, polymerisation

Materials

  • suitable for all polyolefines as well as for most of the technical plastics.

Customized special solutions:

  • various coatings of the flow channel
  • special breaker plates
  • customised adaption
  • rheologically optimised adaption with special adapter elements
  • different installation options
  • high pressure design - up to 800 bar (K-SWE)

Function

  • continuously operating melt filter
  • 100 % venting by venting grooves
  • 2 screen cavities
  • operation and screen change on the same side
  • simple handling for the operator (either manually or automatically).
Screenchanger K-SWE

Screenchanger LK-SWE

Screenchanger K-SWE


Contact
Quotation form

<< Start < Prev 1 2 Next > End >>